Skar Audio engineered the RP-2000.1D Class D monoblock subwoofer amplifier to be dominant in both power and reliability compared to anything else on the market in its class. Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in the RP-2000.1D.
The RP-2000.1D is 1-ohm stable and utilizes a wide array premium internal components that make it extremely powerful and reliable - such as its high-speed MOSFET power supply and advanced PCB board layout. Conservatively rated at 2,000 watts RMS power at a 1-ohm load, with the capabilities of reaching beyond 2,800 watts at max power output. This amplifier is by far one of the most popular and affordable monoblocks we have ever released, and is great for powering a pair of subwoofers in a "daily driver" subwoofer setup in any vehicle.
In addition to all of the above features, the oversized 1/0 gauge power and ground terminals found on the amplifier allow for maximum current flow and therefore higher power output and more efficient operation. Furthermore, you'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ switch (0, +6, +12dB), and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
Featuring 4-way protection circuitry, you'll have the peace of mind knowing that you are protected against damage to the amplifier for various reasons - including electrical shortage, over heating, low voltage, and more. This amplifier comes with a remote subwoofer level control (bass knob) allowing the user to have full control over their bass from the front of the vehicle.
|RMS Power @ 1 Ω||2,000W x 1 Ch (14.4v)|
|Peak Power @ 1 Ω||2,800W x 1 Ch (14.4v)|
|Power & Ground Input Size||1/0 Gauge|
|Remote Bass Knob and Cable Included||Yes|
*Skar Audio always recommends professional installation for all of our products.*
*High power amplifiers producing 1500 watts or more may require additional upgrades to your vehicles stock charging system.*
*Never mount amplifiers directly on the enclosure*
- Skar Audio RP-2000.1D Monoblock Amplifier
- 1-ohm Stable Car Subwoofer Amplifier
- Class D Monoblock Subwoofer Amplifier
- 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
- RMS Power at 2 Ohms: 1,400 Watts x 1 Channel (14.4v)
- RMS Power at 4 Ohms: 800 Watts x 1 Channel (14.4v)
- RMS Power at 1 Ohm: 2,000 Watts x 1 Channel (14.4v)
- Peak Power at 1 Ohm: 2,800 Watts x 1 Channel (14.4v)
- High Speed MOSFET Power Supply
- Soft Turn on Circuit
- Frequency Response: 20Hz - 250Hz
- Signal to Noise Ratio: 85dB
- Damping Factor: 150<
- Bass EQ Switch: 0, +6dB, +12dB
- Low Pass Filter (Variable): 50Hz - 220Hz
- Subsonic Filter: Off - 50Hz
- Remote Bass Knob & Wire Included
- 1/0 Gauge Power and Ground Terminals
- Working Voltage: 8.5V - 14.4V
- Fuse Rating: 200 Amp
- Dimensions: 17.75" (Length) x 6.25" (Width) x 2.25" (Height)
Real World Amplifier Dyno Testing Results
- Certified (RMS) Power at 1 Ohm: 2,274 Watts (14.33v)
- Dynamic (Peak) Power at 1 Ohm: 3,107 Watts (14.50v)
75 Reviews Hide Reviews Show Reviews
I bought 2 of these amps for my skar subs and it sounds amazing...thank u D4S
Nice amp slim design makes it easy to mount anywhere
Super awesome amp. This thing puts out.
I'm very pleased with my purchase of the RP-2000.1D amplifier
A1 shipping. Powering 2 DDX’s Sounds phenomenal!!
Although this thing is one ohm stable, i have a soundqubed hdx3 12 inch sub on this right now with the impedance at actually 0.75 pushing 2000 continuous to it and it has not once shut down in protection and barely even gets warm. This amplifier is truly a great one.
Love this amp has solid power for my sundown x-15. Very fast shipping excellent service
When wired @ a 1 ohm load it definitely rocked the two 12’s I had it going to.. can only imagine what a higher rms on an amp like this would do.... and for the price ....!!! What what...
I couldn’t pass on this amp with it being on sale. If a sundown amp was on sale at the time I would have gotten that just because it would have matched the speakers, but this is the second Skar audio amp I’ve purchased, and they both handle the power they say and then some. Haven’t been able to turn anything up that much yet. Waiting on the speakers to break in a little bit before that. But this amp is pushing my x8s plenty right now. And the amp works great and stays cool