Skar Audio SKv2-2500.1D Monoblock

The Skar Audio SKv2-2500.1D is a competition grade monoblock class D subwoofer amplifier that was designed to deliver unequivocal performance and power output. As a part of the flagship SKv2 series of amplifiers from Skar Audio, this model utilizes only the highest quality internal components and features advanced engineering enhancements that allow it to outperform anything else on the market in its power class.

Whether you are competing in the SPL lanes, or looking for the absolute best amplifier to power your "daily driver" audio system, look no further - this is the amplifier for you. The SKv2-2500.1D is conservatively rated at 2,500 Watts RMS power, and at max power output can produce more than an astonishing 2,900 watts. In addition to its extreme performance capabilities, this amplifier features an advanced heatsink design that allows for maximum cooling, as well as 4-way protection circuitry, enabling the amplifier to operate efficiently at peak output levels for hours on end.

Furthermore, you'll have full reign over your amplifier with the built-in user control panel, featuring variable adjustment tunings for gain level, subsonic filter, bass boost, low-pass filter, and phase control. Versatility is key, and so you have the ability with the SKv2-2500.1D to run them strapped if desired, which is unique to our SKv2 series of amplifiers. In addition to all the above features, it also has both RCA inputs and outputs so that you can easily daisy chain multiple amplifiers together, and utilizes massive 1/0-gauge power and ground input terminals which allow for maximum current flow and therefore higher power output.

*Skar Audio always recommends professional installation for all of our products.*

*High power amplifiers producing 1500 watts or more may require additional upgrades to your vehicles stock charging system.*

*Never mount amplifiers directly on the enclosure*

• Skar Audio SKv2-2500.1D Class D Monoblock Subwoofer Amplifier
• 1-ohm Stable Car Subwoofer Amplifier
• Competition Grade Quality and Performance
• 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
• RMS Power at 2 Ohms: 1,450 Watts x 1 Channel (14.4v)
• RMS Power at 4 Ohms: 790 Watts x 1 Channel (14.4v)
• RMS Power at 1 Ohm: 2,500 Watts x 1 Channel (14.4v)
• Peak Power at 1 Ohm: 2,900 Watts x 1 Channel (14.4v)
• RMS Power at 2 Ohms (Strapped): 5,800 Watts x 1 Channel (14.4v)
• Frequency Response: 15Hz - 270Hz
• Signal-to-Noise Ratio: 95dB
• Efficiency at 4 Ohms: 86%
• Damping Factor: 200<
• Low Level Input (Gain): 6V - 0.2mV
• RCA Line Output: Yes
• Low Pass Filter at 24dB Slope: 35Hz - 250Hz
• Bass Boost at 45 Hz: 0dB - 9dB
• Subsonic Filter at 24dB Slope: 10Hz - 50Hz
• Phase Shift: 0 - 180 Degrees
• LED Power & Protection Indicators: Yes
• Master / Slave (Strappable): Yes
• Remote Bass Knob & Wire Included
• 1/0 Gauge Power and Ground Terminals
• Working Voltage: 8.5V - 16V
• Fuse Rating: 250 Amp
• Dimensions: 20.5" (Length) x 9.15" (Width) x 2.5" (Height)

Real World Amplifier Dyno Testing Results

• Certified (RMS) Power at 1 Ohm: 2,525 Watts (13.25v)
• Dynamic (Peak) Power at 1 Ohm: 2,803 Watts (13.56v)

Click Here to Download the SKv2 Amplifier Manual