Description
JP 23 V2 BLUE AMPLIFIER BY DOWN4SOUND | 2800W RMS Power Output
Unleash the true potential of your car audio system with the JP23 V2 BLUE Monoblock Amplifier. Engineered in Dunnellon, FL, and Las Vegas, Nevada, and assembled by passionate car audio enthusiasts, this revamped version is 23% more compact than its predecessor (JP 23 V1.5), yet incredibly powerful with a 2800W RMS output at 1-OHM. Elevate your audio experience with the JP23 V2 BLUE's potent performance, sleek style, and robust construction.
Technical Highlights
- Powerful Sound: Boasts 2800W RMS power at 1-OHM, ensuring high-quality sound reproduction.
- Enhanced Cooling: Upgraded thermal management featuring quiet high-speed cooling fans.
- Compact: Innovatively designed to be 23% smaller than the previous JP23 version, ensuring it fits seamlessly into various spaces.
RMS Power:
- 1 ohm: 2800W x 1 @ 14.4V
- 2 ohms: 1800W x 1 @ 14.4V
- 4 ohms: 800W x 1
- 2 ohm Linked: 5600W x 1
Voltage Range: 9 to 15.5 Volts
Tuning and Sound:
- Low Pass: 35Hz - 250Hz
- Frequency Response: 10Hz - 270Hz
- Subsonic: 10Hz - 50Hz
- Bass Boost: 0-9 dB
- Input Sensitivity: 6V - 0.2V
- Signal to Noise Ratio: 97dB
- T.H.D @ 4 ohm: <0.1%
Fuse Rating:
- Single unit: 300A
- Strapped: 600A
Dimensions: 13.38" L x 7.40" W x 2.24" H
Additional Features:
- Strappable Digital Monoblock Amplifier
- Plexi Glass Backplate
- 4-Way Protection Circuits: Thermal, High & Low Voltage, Speaker Short, and DC
- Warranty: 1-year warranty, and consider the optional extended warranty for 0.5-ohm usage.
Videos
View AllCloseWarranty Information
Warranty Information
Your new Down4Sound product is covered by 1 limited warranty if purchased from Down4Sound or an authorized Down4Sound dealer. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of listed specifications, or any product that has been modified or repaired by anyone other than Down4Sound. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier.
All warranty returns must be accompanied by the original sales invoice or receipt. You must contact us to request an RMA number prior to sending any returns via the RMA request form on our website. You are responsible for the cost of shipping your product back to us for warranty examination. If your product is covered under warranty, shipping back to you will be at no charge to you – if your product is replaced/repaired outside of warranty you must pay for return shipping and repair bill prior returning of the product or if no defect is found you are required to pay for return shipping only.
At the sole discretion of Down4Sound your product will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Down4Sound the customer is liable for the cost of all damages, necessary repairs, or replacement. Be sure to properly pack your return!
* Extended additional warranty purchased on amplifiers take in affect from the date of purchase and must also be stated on orginal sales invoice or receipt.
Refund/Return Policy: https://www.down4soundshop.com/shipping-returns/
Down4Sound - Hours of Operation
Additional Information
Category Type: |
Amplifiers |
Product Type: |
Amplifier |
Amplifier Type: |
Monoblock |
Amplifier Color: |
Blue |
Product Color: |
Blue |
92 Reviews
-
Amazing!
Amazing high quality amplifier!
-
JP23
Here's an honest review of the JP23. The packaging was crap. The amp was shoved into an oversized box with 1 strip of packing paper as protection. The box arrived damaged with a couple of holes in it's side. The amp itself was ok though. Now as for the amp, I like it. It's smaller than the AT1400 I was upgrading from so I had no worries about it fitting in the spot I had my other amp in. It puts out good power and sounds great. The fan is always on and is fairly noisy but other than that I'm happy with my purchase. The Black Friday sale price made this amp impossible to pass up. The bass knob is really nice. It's all aluminum and the potentiometer is very smooth and accurate. The display is a little bright for my taste but I've seen post about people putting a small strip of window tint over the display. That may be something I'll do as well. Overall this amp hits hard and clean.
-
Jp23
This amp beautiful the blue is just perfect and that clear bottom lol only complaint is that I didn’t get a signature with I’m pretty said I selected/paid for but it’s not a big deal
-
Why buy anything else
After watching many of dynos with Derek and seeing the power I just had to check this guy out. Oh my is this one powerful piece of audio equipment. Well built, great color and will bang all day, even for we who have no volume control and go full tilt always lol
-
Jp23 v2 well worth the money
You can't beat this a.p for the price
-
JP 23V2
Where do I begin..... AMAZING product, the design, materials are incompatibleb!!! My subs have never sounded this good and clean with clean power to spare !!! Definitely a mist have for your upcoming system or upgrade.
-
JP23v2 Blue 4TW!!!
I purchased the JP23v2 Blue literally the day it came out because I was in the market for a 2k amp and had a failed FB market transaction the night before. After a few months of owning it, I can comfortably say Man am I glad that fb market deal fell through because this amp dropped and fit my budget and the space I had for the install. It was rated higher than I thought I needed at the time, but headroom is never a bad thing, so I scooped up this beast knowing that the previous version was monster in its own, and this one had an even higher RMS rating. I was originally powering a quad 8 set-up with DC Audio M3 8's, which are rated for 600wRMS each. This amp got those little 8's slamming in my truck and was perfect power for them. I had only smelt coils after long drives of over an hour and really amazed me. I am now running the amp on two Digital Designs Audio 3510 sc subwoofers and they love the power they are getting, and the 2-10s ended up being louder than the 4-8s even though the 10s have less surface area, they make up for it in other areas. The clip light, temp, and voltage on the remote gain knob is a must for every Bass head because it keeps you from pushing the amp too hard and keeps the sub happy with a clean signal when you can constantly adjust to each song and get that gain set perfect. The amp has a damping factor over 350 which they don't list on the website but is in the manual. That is a better damping factor than the infamous Rockford BDCPs, and some of the DD M Class amps! So, you can be assured that this is not only a high powered amp that dyno by Willison was over 3,400w at 1ohm, but it is also an amazing SOUNDING AMP. The DD 3500 series are some of the best sounding 10's on the market, and this amp definitely does them justice! Add in the extra control from the supercharging option on the subs, and the SQ is something I have never been fortunate enough to own until now! Highly recommended to anyone needing 2-4k worth of power, but make sure to have that electrical upgraded and ready for the demand of this monster!
-
JP23v2 Blue 4TW!!!
I purchased the JP23v2 Blue literally the day it came out because I was in the market for a 2k amp and had a failed FB market transaction the night before. After a few months of owning it, I can comfortably say Man am I glad that fb market deal fell through because this amp dropped and fit my budget and the space I had for the install. It was rated higher than I thought I needed at the time, but headroom is never a bad thing, so I scooped up this beast knowing that the previous version was monster in its own, and this one had an even higher RMS rating. I was originally powering a quad 8 set-up with DC Audio M3 8's, which are rated for 600wRMS each. This amp got those little 8's slamming in my truck and was perfect power for them. I had only smelt coils after long drives of over an hour and really amazed me. I am now running the amp on two Digital Designs Audio 3510 sc subwoofers and they love the power they are getting, and the 2-10s ended up being louder than the 4-8s even though the 10s have less surface area, they make up for it in other areas. The clip light, temp, and voltage on the remote gain knob is a must for every Bass head because it keeps you from pushing the amp too hard and keeps the sub happy with a clean signal when you can constantly adjust to each song and get that gain set perfect. The amp has a damping factor over 350 which they don't list on the website but is in the manual. That is a better damping factor than the infamous Rockford BDCPs, and some of the DD M Class amps! So, you can be assured that this is not only a high powered amp that dyno by Willison was over 3,400w at 1ohm, but it is also an amazing SOUNDING AMP. The DD 3500 series are some of the best sounding 10's on the market, and this amp definitely does them justice! Add in the extra control from the supercharging option on the subs, and the SQ is something I have never been fortunate enough to own until now! Highly recommended to anyone needing 2-4k worth of power, but make sure to have that electrical upgraded and ready for the demand of this monster!
-
JP23v2
I have 2 of these amps and they are top notch. Running each to a Skar EvL 12” i have to be on top of my Epicenter micro bass knob or they will pop the Skars like pimples. Altho the bass knob that comes with them is one of the best ive used. I got treated twice, Only an owner of these amps will know what that means. At the moment these are the best bang for the buck which wont go up in flames.
-
Jp23 v2
You will not find better wattage per dollar value then jp's amps I'm running the jp23 v2 on 2 ct sounds meso 12s in a custom buit box I made tuned to 33 ish hz about 4.35cubes after subs displacement and this thing is slapping!!!if you don't have all the needed electrical upgrades don't bother lol u must do it this thing suckss the juice outta what ever you got love everything about it only con is the brightness on the bass nob is still after render alil bright would love if it was red would deff dim it with out dimming it more i just slapped a piece of tin and im good but that's just my imo another thing I would love if the nob line for level was glow in the dark or better yet lit up hard to know where I'm at at night but hey that's just a nit pick this freaking thing slappppps 2 words BUY IT