SMD

Specifications: Input Range: 6v-30v Voltage Reading Range: 12.6v - 20.2v Accuracy: +/- 0.20v (due to the nature of a bar graph) 2.75" x 2.75" x 0.47" depth 100% Analog circuitry allows for near instantaneous voltage accuracy versus a...

The purpose and benefit of the D’Amore Engineering / SMD Crossover Calibrator. Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The...

Steve Meade Designs Active High Level Converter HLC-2 The Steve Meade Designs HLC-2 is an audiophile quality stereo active high level converter useful for connecting aftermarket audio amplifiers to OEM audio systems that do not have RCA (low level)...

Protect your vehicle from the dreaded "Car-B-Q" with this product. Whether you have a demanding aftermarket sound system or other aftermarket/auxiliary accessories such as lighting, winches, air pumps etc, it is critical you add a fuse as close to the...

High quality ceramic ANL fuse from SMD (Steve Meade Designs). Extremely heat resistant case will not warp like your typical standard plastic ANL fuse. Available in pairs from 100a, 150a, 200a, 250, 300a, 500a. - High quality- Ceramic- Extreme heat...

SMD Triple Play Pack Meter Edition (VM-1, OM-1, TM-1)Each Triple Play Pack comes with the following:1. SMD Volt Meter (12V )2. SMD Temperature Meter (Fahrenheit or Celsius)3. SMD Output Meter

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector.The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can...