Description
Package Includes:
• (2) ZXI-654 - 6.5" 2-Way Coaxial Speakers with Kevlar Cone 180 Watts 4-Ohm
• (2) ZXI-694 - 6x9" 2-Way Coaxial Speakers with Kevlar Cone 240 Watts 4-Ohm
• (1) CANDY-X4B - Compact Full-Range Class D 4-Channel Amplifier 1600 Watts
• (1) SB10A - 10" Shallow Subwoofer Bass Packages 700 Watts with Built In Amplifier
• (2) AMPKIT8 - AMPKIT8 8-GA Installation Kit For Car Amplifiers
Another amazing complete system package has been put together by our experts to help you make your choices easy to get amazing sound coming from your vehicle. This package includes everything you need to get amazingly loud sound with very high sound quality.
This combo includes a pair of our awesome ZXI series coaxial 6.5s and 6x9s to incorporate the perfect match of speakers that produce midbass, vocals, and highs to fill your vehicle with crisp and loud sound. Powering the ZXI series coaxials, we have our highly popular CANDY-X4B 4 channel amplifier that has been perfectly matched to produce the maximum amount of volume from your new sound system. To fill out the lower end of the frequency range we include our slim line SB10A subwoofer that fits virtually anywhere.
The slim design allows it to be placed anywhere there is room and behind most truck seats as well. The SB10A is a powered 10-inch subwoofer and enclosure that will really bring out the deep end on your frequency range.
Highlights
- Our ZXI series of speakers never fails to impress! That is why we added these fantastic coaxial speakers to this combo. Not only do they produce impressive sound quality, but their maximum volume is truly astounding. You will receive one pair of ZXI-654 6.5 speakers and ZXI-694 6x9 speakers, which come in 4-ohm loads.
- The CANDY-X4B amplifier was matched to perfectly power the ZXI series speakers to their maximum potential all while maintaining durability and longevity. It is compact enough to mount almost anywhere but packs a powerful punch for its size.
- You will never miss a beat of your bass with our slim line SB10A powered subwoofer. This all-in-one sub, enclosure, and amp produces very rich and punchy bass that will fill your vehicle with the lower frequencies you crave. Its size makes it small enough to fit just about anywhere (including behind truck seats) and not lose a lot of storage space.
- We also Include two installation kits to make the installation easy with high quality wiring which includes power, ground, remote, RCA, and fusing.
Technical details
ZXI-654 | |
Specifications | |
Nominal Diameter | 6.5” / 165mm |
Nominal Impedance | 4 ohm |
RMS Power Handling | 80 Watts |
MAX Power Handling | 240 Watts |
Sensitivity (1w/1m) | 89dB |
Frequency Response | 40Hz-20KHz |
Recommended HI Pass Crossover | 60Hz |
Speaker Type | 2-Way |
Midrange | |
Voice Coil Diameter | 1” / 25.5mm |
Voice Coil Former Material | KSV |
Winding Material | EISV |
Cone Material | Glass fiber |
Surround Material | Rubber |
Basket Material | Steel |
Magnet Material | Barium Ferrite |
Magnet Weight | 14.46 oz / 410g |
Tweeter | |
Nominal Diameter | 1" (25.4mm) |
Voice Coil Diameter | 0.8"(ø20.4mm) |
Voice Coil Former Material | KSV |
Winding Material | EISVM |
Diaphragm Material | PEI |
Magnet Material | Neodymium |
Magnet Weight | 0.3 oz / 8.5g |
ZXI-694 | |
Specifications | |
Nominal Diameter | 6X9” |
Nominal Impedance | 4 ohm |
RMS Power Handling | 120 Watts |
MAX Power Handling | 360 Watts |
Sensitivity (1w/1m) | 92dB |
Frequency Response | 31.5Hz-20KHz |
Recommended HI Pass Crossover | 50Hz |
Speaker Type | 2-Way |
Midrange | |
Voice Coil Diameter | 1.2” / 30.4mm |
Voice Coil Former Material | KSV |
Winding Material | EISV |
Cone Material | Glass fiber |
Surround Material | Rubber |
Basket Material | Steel |
Magnet Material | Barium Ferrite |
Magnet Weight | 19.4 oz / 550g |
Tweeter | |
Nominal Diameter | 1" (25.4mm) |
Voice Coil Diameter | 0.8"(ø20.4mm) |
Voice Coil Former Material | KSV |
Winding Material | EISVM |
Diaphragm Material | PEI |
Magnet Material | Neodymium |
Magnet Weight | 8.5g |
CANDY-X4B | |
Specifications | |
Class | Class-D |
Type | Stereo Full Range |
Channels | 4 |
Total Watts (PEAK) | 1600W |
RMS Power @ 4 ohm | 80W x 4CH |
RMS Power @ 2 ohm | 120W x 4CH |
RMS Power @ 1 ohm | - |
RMS Power @ 4 ohm Bridge | 240W x 2CH |
Min. Speaker Impendance | 2 OHM X 4CH |
Frequency Response | 20Hz-20kHz |
Signal/Noise Ratio | 100 dB |
Iinput Impendence | 10K |
Channel Separation | 50 dB |
THD % | 0.01% |
Low Level Input Range | 0.2-6V |
High Level Input | YES |
Selectable X-OVER | LPF/FULL/HPF |
X-OVER Filter Range | 40HZ-250Hz |
Bass Boost Range | 0-12 dB |
Bass Boost Frequency | Fixed 40HZ |
Phase Selector | - |
Led Indicator | Power/Protection |
Power Input Terminal Size | 4GA |
Fuse Size | 35AX2 |
Remote Level Control | - |
Thermal Protection | YES |
Over-Load Protection | YES |
Short Circuit Output Protection | YES |
voltage input protection | YES |
Dimensions LxWxH (inches/mm) | 9.21 x 5 x 187” 234 x 127 x 47.5mm |
Heatsink Lenght | 8.97” / 228mm |
SB10A | |
Specifications | |
Speaker Type / Size | 10" / 261mm |
Total Impedance | 2 ohm |
RMS Power Handling | 350W |
MAX Power Handling | 700W |
Sensitivity (1w/1m) | 83dB |
Frequency Response | 38-250Hz |
Motor | |
Voice Coil Diameter | 1.5" / 38.6mm |
Voice Coil Former Material | Aluminum |
Winding Material | EISV |
Cone Material | IPP |
Surround Material | Rubber |
Basket Material | SPCC |
Magnet Material | Ferrite |
Magnet Weight | 40 oz |
Amplifier | |
Amplifier Class | Digital |
Amplifier Type | Monoblock Subwoofer |
Number of Channels | 1CH |
Minimum Impedance | 2 ohm |
Signal to Noise Ratio | 75 dB |
Efficiency @ 4ohm | 0,75 |
Total Harmonic Distortion (T.H.D) | 0.3% |
Low Level Input Range | 0.1-0.6 V |
High Level Input Range | Yes |
Selectable X-Over | LPF Fixed |
X-Over Filter Range | 50 - 200 Hz |
Bass Boost Range | 0-6 dB |
Bass Boost Frequency | 50 Hz |
Phase Selector | 0-180° |
Led Indicator | Power - Protection |
Power Input Terminal Size | 8ga |
Fuse Size | 30 A |
Remote Level Control | Yes |
Thermal Protection | (75°C / 167°F) |
Over-Load Protection | Yes |
DC Output Protection | Yes |
Short Circuit Output Protection | Yes |
Voltage Input Protection | Yes (<8v,>16v) |
Box Specifications | |
Internal Volume | 16L / 0.56ft3 |
Load Configuration | Parallel In |
Box Type | Sealed Box |
Box Material | 0.59" MDF |
Finish Material | Non-Woven fabric |
(-3Db) Dropping Point | 45Hz |
Measurements | |
Height | 14.96" / 380mm |
Width | 19.3" / 490mm |
Depth 1 | 4.92" / 125mm |
Depth 2 | 7.4" / 188mm |
AMPKIT8 | |
What's in the box? | |
ANL fuse holder with ANL-100A | |
6 ft. 8-GA Loom Tube | |
Rubber Grommet | |
17 ft. Red Power Cable: 8.3mm² OD: 6.7mm | |
3 ft. Black Ground Cable: 8.3mm² OD:6.7mm | |
17 ft. Red/Black Twisted RCA | |
17 ft. Remote Cable 20 x 0.15mm | |
17 ft. Red/Black Speaker Cable 0.81mm² x 2 wires OD 2.4 x 4.8mm |