DOWN4SOUND
DOWN4SOUND | JP33 V2 TITANIUM | 3300W RMS AMPLIFIER
- SKU:
- JP33V2-TI-
- MPN:
- JP33V2-TI
Description
Down4Sound JP33 V2 Titanium 3300W RMS Monoblock Amplifier
The Titanium Down4Sound JP33 V2 is a 3300W RMS monoblock car audio amplifier engineered for powerful, controlled subwoofer performance. Building on the original JP33 V1, the V2 adds a stronger power supply, thicker end plates, a wired bass knob, and built-in clip input and clip output detection.
What Changed from the JP33 V1 to the JP33 V2?
- Stronger Power Supply: The JP33 V2 features an upgraded power supply for improved power delivery and stability.
- Thicker End Plates: The V2 features thicker end plates for increased strength and durability.
- Wired Bass Knob: The V2 includes a wired bass knob with voltage, temperature, and clipping information.
- Clip Input and Clip Output Detection: Clip input and clip output detection have been added directly to the amplifier.
Built for High-Power Subwoofer Systems
The JP33 V2 delivers up to 3300W RMS at 1 ohm and is designed for bass enthusiasts who want serious output from their subwoofer system. Dual power and ground inputs, premium Tiffany RCA connectors, and active internal cooling help support demanding car audio installations.
Enhanced Features for Maximum Performance
- Dual Power and Ground Inputs: Dual inputs provide increased current capacity and improved power stability.
- Premium RCA Connectors: Features true Tiffany RCA connectors for a secure, high-quality signal connection.
- Always-On Cooling Fan: The internal cooling fan activates when the amplifier powers on to help manage temperatures during extended use.
JP33 V2 Power Ratings
Power ratings tested at 14.4V and 1% THD:
- 1 Ohm: 3300W RMS
- 2 Ohms: 2300W RMS
- 4 Ohms: 1200W RMS
JP33 V2 Specifications
- Amplifier Type: Monoblock
- Operating Voltage: 12V to 15.6V
- Frequency Response: 14Hz to 260Hz
- Signal-to-Noise Ratio: 96dB
- Damping Factor: <300
- Input Sensitivity: 0.2V to 6V
- Subsonic Filter: 10Hz to 50Hz
- Low-Pass Filter: 35Hz to 250Hz
- Phase Control: 0 to 180 degrees
- Strappable Connection: Yes
- Minimum Speaker Impedance: Stable at 0.5 ohm with a properly upgraded electrical system
- Recommended Fusing: 350A total, 175A per positive input
- Clip Input Detection: Yes
- Clip Output Detection: Yes
- Bass Control: Aluminum wired bass knob with voltage, temperature, and clipping information
- Speaker Output: 4 gauge
- Power Inputs: 2 x 0 gauge
- Dimensions: 13.8 inches long x 9.37 inches wide x 2.63 inches high
- Country of Origin: Made in South Korea
Upgrade your subwoofer system with the Titanium Down4Sound JP33 V2 3300W RMS monoblock amplifier and experience powerful, controlled bass output.
Electrical Upgrade Notice
When wiring the JP33 V2 at lower impedances or playing extreme low-frequency bass, upgrading the vehicle’s electrical system is strongly recommended for stable performance. Recommended upgrades include:
- The Big 3 wiring upgrade
- Upgraded alternator
- Adequate reserve battery capacity
Color: Titanium
Warranty Information
Warranty Information
Your new Down4Sound product is covered by 1 limited warranty if purchased from Down4Sound or an authorized Down4Sound dealer. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of listed specifications, or any product that has been modified or repaired by anyone other than Down4Sound. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier.
All warranty returns must be accompanied by the original sales invoice or receipt. You must contact us to request an RMA number prior to sending any returns via the RMA request form on our website. You are responsible for the cost of shipping your product back to us for warranty examination. If your product is covered under warranty, shipping back to you will be at no charge to you – if your product is replaced/repaired outside of warranty you must pay for return shipping and repair bill prior returning of the product or if no defect is found you are required to pay for return shipping only.
At the sole discretion of Down4Sound your product will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Down4Sound the customer is liable for the cost of all damages, necessary repairs, or replacement. Be sure to properly pack your return!
* Extended additional warranty purchased on amplifiers take in affect from the date of purchase and must also be stated on orginal sales invoice or receipt.
Refund/Return Policy: https://www.down4soundshop.com/shipping-returns/
Down4Sound - Hours of Operation
Additional Information
Amplifier Type: |
MONOBLOCK |
Amplifier Color: |
TITANIUM |
Product Type: |
Amplifier |
Related Products
Related Products
DOWN4SOUND | JP33 TITANIUM | 3300W RMS AMPLIFIER
DOWN4SOUND
DOWN4SOUND | JP33 V2 PURPLE | 3300W RMS AMPLIFIER
DOWN4SOUND
DOWN4SOUND | JP33 V2 TEAL | 3300W RMS AMPLIFIER
DOWN4SOUND
DOWN4SOUND | JP33 V2 BLUE | 3300W RMS AMPLIFIER
DOWN4SOUND
DOWN4SOUND | JP33 V2 GREEN | 3300W RMS AMPLIFIER
DOWN4SOUND