AUDIO TECHNICIAN TOOLS

Specifications: Input Range: 6v-30v Voltage Reading Range: 12.6v - 20.2v Accuracy: +/- 0.20v (due to the nature of a bar graph) 2.75" x 2.75" x 0.47" depth 100% Analog circuitry allows for near instantaneous voltage accuracy versus a...

The purpose and benefit of the D’Amore Engineering / SMD Crossover Calibrator. Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The...

Steve Meade Designs Active High Level Converter HLC-2 The Steve Meade Designs HLC-2 is an audiophile quality stereo active high level converter useful for connecting aftermarket audio amplifiers to OEM audio systems that do not have RCA (low level)...

The purpose and benefit of the D’Amore Engineering / SMD Destortion Detector PLUS.The purpose of this tool is to enable the user to set the gain of an audio amplifier to match the source unit’s output level, quickly and accurately. Proper...

The SMD dd1 by D'amore engineering and Steve Meade Designs is the perfect way to keep your amplifier distortion-free. The Distortion Detector's 100% analog circuitry guarantees an accurate reading, while the 15,000 watt operating range ensures that even...

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector.The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can...

The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can also be useful for detecting distortion in the audio signal caused by poorly designed...

The purpose of this tool is to enable the user to: Measure True Amplifier Power output into any load reactive or resistive Measure Common DC voltages Measure DC voltage drops during quick transients on cable runs or battery / charging...

THE IMPEDANCE METER / SIGNAL GENERATOR  Some Uses: Obtain a driver's T/S Parameters* Determine speaker crossover set points Find tuning frequency of passive radiator Find tuning frequency of ported enclosure Find volume of sealed...

  Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The purpose of this tool is to enable the installer to set the crossover frequency...