DS18 Audio
DS18 PRO-DKN1XS 2" Throat Bolt On Neodymium Driver with Spacer, 2" Throat Titanium Voice Coil 640 Watts and PRO-HA52/BK Horn 680 Watts 118dB 8-Ohm Mounting Depth 5.22" Throat
(No reviews yet)
Write a Review
- SKU:
- PRO-DKN1XS
Description
The DKN1S includes the DS18 DKN1XS neodymium driver plus our newly redesigned shorty throat so you only need 5.2 inches mounting depth to mount these ear ripping drivers. The new throat is aluminum with brilliantly brushed DS18 logos and made for maximum directional efficiency and the included spacer amplifies the DB sensitivity. With an AES power handling of 170w and peak at 680w you will be sure to draw everyone's attention to your audio!
Highlights
- DS18 Driver spacer increases the sensitivity decibel level significantly for the loudest response.
- Aluminum "Shorty" throat with brushed DS18 logos for an amazing look and great fitment.
- DKN1 Driver with an AES rating of 170 watts and Peak of 680w for super loud and vibrant highs with a Neodymium 8 ohms voice coil.
- 5.2 inch mounting depth and 5.5 inches total mounting depth so you don't need a large amount of mounting depth like other traditional driver and throat combinations.
Technical Details
| Throat Diameter | 2"/50.8mm |
| Installation Type | Bolt-on |
| Nominal Impedance | 8 Ohms |
| Peak Power Handling | 680W |
| Program Power Handling | 340W |
| AES Power Handling | 170W |
| Sensitivity (1w/1m) | 118 dB |
| Frequency Response | 630Hz - 18KHz |
| Recommended HI Pass Crossover | 900 Hz |
| Motor: | |
| Voice Coil Diameter | 2"/51mm |
| Voice Coil Former Materia | Kapton |
| Winding Materia | CCA |
| Diaphragm Material | Titanium |
| Magnet Material | Neodymium |
| Magnet size | 4 mm Thick x 134 mm Diameter |
| Measurements: | |
| Overall Diameter | 7"/180 mm |
| Overall Depth | 5.5"/141.8 mm |
| Bolt Pattern/Type | 5.5 mm hole - 6.3"/161 mm Diameter |
| Mounting Depth | 5.2"/132.8mm |
| Mounting Hole Diameter | 5.7"/145mm |
Related Products
DS18 PRO-DKN1XSPH 2" Throat Bolt On Neodymium Driver with Spacer, 2" Throat Phenolic Voice Coil 640 Watts and PRO-HA52/BK Horn 680 Watts 118dB 8-Ohm Mounting Depth 5.22" Throat
DS18 Audio
$129.95
The DKN1XSPH includes the DS18 DRN1 driver plus our HA-52 shorty throat so you only need 5.2 inches mounting depth to mount these ear ripping neo drivers. The throat is plastic with DS18 logos and...
PRO-DKN1XSPH
DS18 PRO-DKH1X 2" Throat Bolt On Compression Driver with Spacer, 2" Throat Titanium Voice Coil and PRO-HA102/BK Horn 640 Watts 115dB 8-ohm Mounting Depth 7.9"
DS18 Audio
$109.95
Everyone is looking for louder horns and what they can do to tweak them. We make that easy for you with no guesswork with the DKH1X. This full size driver includes the DS18 DKH1 redesigned to be...
PRO-DKH1X
DS18 PRO-DKH1 2" Throat Bolt On Compression Driver 2" Throat Titanium Voice Coil and PRO-HA102/BK Horn 640 Watts 111dB 8-ohm Mounting Depth 7.18"
DS18 Audio
$99.95
Engineered and Designed in the US, the DS18 Compression Drivers with aluminum horns are the top of the line high frequency driver/tweeter/horns in the market. These bad boys deliver so much power...
PRO-DKH1
DS18 PRO-DKH1S 2" Throat Bolt On Compression Driver 2" Throat Titanium Voice Coil and PRO-HA52/BK Horn 640 Watts 110 Db 8-ohm Mounting Depth 4.9"
DS18 Audio
$89.95
The DKH1S includes the DS18 DKH1 driver plus our newly redesigned shorty throat so you only need 4.9 inches mounting depth to mount these ear ripping drivers. The new throat is aluminum with...
PRO-DKH1S
DS18 PRO-DKH1XS 2" Throat Bolt On Compression Driver with Spacer, 2" Throat Titanium Voice Coil and PRO-HA52/BK Horn 640 Watts 114dB 8-ohm Mounting Depth 5.74"
DS18 Audio
$94.95
The DKH1S includes the DS18 DKH1 driver plus our newly redesigned shorty throat so you only need 4.9 inches mounting depth to mount these ear ripping drivers. The new throat is aluminum with...
PRO-DKH1XS